How to remove rust from a car – learn the easiest way

7 tips when buying a car online

Why does the car rust?

The formation of rust is the result of the breakdown of iron-based metals, which in turn occurs due to oxidation. Pure iron is not as susceptible to rust, but it is also not suitable for the manufacture of cars, therefore in the automotive industry steel alloys suitable for the purpose are used, but they are much more susceptible to rusting to varying degrees depending on a number of factors. Aluminum and magnesium alloys are much more resistant to rust, but their price is high and this makes the car more expensive, which is why they are used more sparingly and less often by manufacturers. Anti-corrosion agents are also applied before bodies are painted, but despite all efforts, rust builds up over the years and endangers your vehicle.

Among the most common causes of rust formation are:

• the improper care of the car,
• the lack of a garage or a safe place to store it,
• the salt and compounds used in winter to clean roads and prevent them from icing, because road salts act as electrolytes and contribute to the formation of rust.

How to choose a car according to an advertisement on the Internet?

How do you remove rust from a car?

If the process has begun, act immediately – the moment there is even a hint of rust. It is much easier to remove surface rust and take steps to save the appearance of your vehicle than to wait for the problem to develop. Usually, the surface rust of a car is formed when the paint breaks down due to mechanical causes and damage or under the strong influence of ultraviolet rays. Dealing with the problem of surface rust is easy – cleaning, sanding down to stainless, using a rust converter applied with a brush or sponge twice every 30 minutes, priming after a day or so, during which the car should do not get wet and protect from moisture, and finally restore the car’s paint.

It seems complicated, labor-intensive, time-consuming and requires funds for the various preparations and paints, but it is good to act immediately, because if you do not take measures and do not deal with the surface rust, it will penetrate deep and become more complicated and expensive to clear it. What’s more, penetrating rust is not only a cosmetic defect and causes not only problems with the appearance of your car, but it can also damage suspension components, which is already a serious problem that goes beyond the appearance and is related to the safety and functioning of the car. This requires you to make an effort to protect your vehicle from rust and to inspect it more often if you drive in conditions that increase the risk of rusting, in order to detect rough or compromised parts in time and avoid taking a risk related to your safety on the road.

Rules and recommendations when buying a used car

Prevention is the best choice

Instead of frantically searching for information on how to remove rust from a car, it is better to take care to delay its appearance. Prevention is the best thing you can do for your vehicle and your own safety. You will significantly slow down processes if:

• You clean and wash your car often so that dirt and salts do not accumulate, which increase the risk of rust formation and accelerate unwanted processes. Modern car washes can help you thoroughly clean. Don’t skimp on it.
• Check the drain holes on the bottom of the doors that allow rain water to drain out, this is much more important than you think but is often overlooked by car owners.
• Clean the car in the winter much more actively and often than in the warm months. This is important in order to remove the salt and residues of mixtures used for winter cleaning and maintenance of the streets. They are a major cause of rust formation.